Well finally hooked up with the mustang guys for a dyno run. I was a bit
disapointed in the output, but with some needed tuning I think I will be
happy with the results. My best HP was 385 and torque was 387. Torque
dropped off at 5000, and hp was still climbing. The A/F meter they put on
the car showed it as lean. So they did not run it up to the max rpm.
Apparently they want to see about a 11:1 a/f ratio. I am running about
14:1. So with some carb changes I should get some better results.
Leave a comment